The Brenna Gauntlet structural firefighting glove is built for interior attack, overhaul, and high-heat operations where ordinary gloves fall short. With specially treated cowhide leather, a high-performance Porelle® FR membrane, and aramid-based inner layers, Brenna delivers serious heat protection, durability, and dexterity for firefighters who work in extreme conditions.

Built for Structural Firefighting Environments

The Brenna Gauntlet is designed specifically for structural firefighting, combining rugged outer materials with intelligent internal layering:

• Back: Black split cowhide leather – tough, durable, heat-resistant shell
• Palm: Black grain cowhide leather – strong grip and abrasion resistance
• Fourchettes: DuPont™ Nomex® fabric between fingers for added flame and heat protection

The outer leather is specially treated for heat, water, and abrasion resistance while remaining flexible enough for tool handling and hose work.

Multi-Layer Heat Shield & High TPP Performance

Under the leather shell, Brenna uses a thermo-protective system engineered for high-heat exposure:

• Thermo-protective layer on the back of the hand and thumb
• Aramid non-woven fabric for increased heat and cut resistance

This multi-layer design delivers TPP exceeding 60, helping shield hands from intense heat while still allowing controlled movement and grip.

Waterproof, Breathable Porelle® Barrier

For fluid and chemical protection, Brenna Gauntlet features a Porelle® P540 polyurethane FR membrane that:

• Creates a barrier against water, chemicals, bloodborne pathogens, and bacteria
• Remains highly breathable, helping reduce sweat buildup
• Stays flexible, sensitive, and firm, so you maintain feel and control during operations

You get structural-level protection without sacrificing comfort or tactility.

Stable Aramid Lining That Stays Put

Inside, a high-density aramid lining adds another layer of thermal defense and stability:

• Increased thickness for stronger heat protection
• Will not stretch or pull out – secured and attached at the fingertips
• Enables easy donning and doffing even when wet
• Brushed on the reverse to trap more air for improved insulation

The result is a lining that doesn’t bunch, twist, or pull out when you remove the glove.

Anatomical 3D Cut for Grip, Dexterity, and Control

Brenna Gauntlet uses an Anatomical 3D Cut to keep the glove working with your hand, not against it:

• Excellent dexterity for nozzle work, tool use, couplings, and radios
• Better grip and fit with reduced bulk in critical areas
• Breathability, sensitivity, and flexibility built into the patterning
• Elastic-tightened wrist helps keep debris, heat, and sparks out while securing the glove on the hand

The design gives you structural protection with a more natural, precise feel.

Key Specs

• Model: Brenna Gauntlet Structural Firefighting Gloves
• Back: Black split cowhide leather
• Palm: Black grain cowhide leather
• Fourchettes: DuPont™ Nomex® fabric
• Moisture Barrier: Porelle® P540 polyurethane FR membrane (water, chemical, pathogen, and bacteria barrier; breathable and flexible)
• Inner Layers: Thermo-protective layer + aramid non-woven fabric for heat and cut resistance
• Lining: High-density aramid lining, brushed inner side, stitched at fingertips (will not pull out)
• Fit & Design: Anatomical 3D cut; advanced stitching; elasticated wrist; high dexterity and grip
• TPP: Exceeds 60
• Sizes (NFPA): 64N, 64W, 64XW, 70N, 70W, 70XW, 76N, 76W, 76XW, 82N, 82W, 82XW, 82XXW
• Spec Sizing (approx.): XS-3XL, including short- and long-finger options (some sizes special order)
• Styles: Gauntlet cuff (Brenna Gauntlet 8081) and para-aramid knitted wristlet (Brenna Wristlet 8082)
• Certification: SEI certified to NFPA 1971, 2018 Edition
• Chemical Treatment: Made without intentional PFAS treatment
• Manufacturing: Produced in Holik facilities in Europe

The post Brenna Gauntlet appeared first on Hunter Apparatus.

The Brenna Wristlet structural firefighting glove (Order No. 8082) is built for interior attack crews who need high heat protection, proven moisture and pathogen defense, and strong dexterity under pressure. With a PFAS-free construction, NFPA 1971:2018 certification, and a Porelle® FR membrane, Brenna Wristlet gloves are engineered for the realities of modern structural fire operations.

Advanced Structural Heat Protection

The Brenna Wristlet glove uses a layered heat shield system designed for sustained high-temperature exposure and tough fireground conditions. The outer shell features:

• Split cowhide leather back, black
• Split cowhide leather palm, black
• Special leather treatment for heat, water, and abrasion resistance while remaining flexible

Underneath, thermo-protective layers on the back of the hand and thumb, combined with aramid non-woven fabric, increase heat, abrasion, and cut resistance. This design helps you maintain protection and performance when temperatures spike.

Moisture & Pathogen Barrier with Porelle®

To protect against fluids and contaminants, Brenna Wristlet gloves use a Porelle® P540 polyurethane FR membrane that:

• Creates a barrier against water, chemicals, bloodborne pathogens, and bacteria
• Remains highly breathable, reducing internal moisture buildup
• Stays flexible and sensitive, preserving tactility and tool control
• Maintains a firm, stable feel inside the glove

This moisture barrier lets you work in wet, contaminated environments with confidence and control.

Comfort, Dexterity & 3D Anatomical Fit

Inside, the glove is lined with increased-thickness aramid lining designed to improve both protection and comfort:

• Increases overall heat protection
• Will not stretch or pull out, even with repeated donning and doffing
• Allows easy don and doff even when wet
• Brushed on the reverse to trap more air, improving insulation and comfort

The Brenna Wristlet also features DuPont™ Nomex® fourchettes (fabric between the fingers) for breathable, heat-resistant flexibility. An Anatomical 3D cut supports a more natural hand position, delivering excellent grip, dexterity, and control of tools, nozzles, and patient care equipment.

Durable, PFAS-Free Shell Construction

Brenna Wristlet structural firefighting gloves are built with materials without intentional PFAS treatment, supporting evolving health and safety standards without compromising performance. The specially treated cowhide leather outer shell stands up to:

• Heat and flame
• Water and steam
• Abrasion and mechanical wear

This makes Brenna a strong option for departments looking to move away from PFAS-treated PPE while maintaining NFPA-compliant performance.

Secure Wristlet Design

The wrist portion of the Brenna Wristlet glove is designed for a secure, close fit that helps keep debris and heat out:

• Para-aramid knitted wristlet for snug, protective closure
• Elastic at the wrist to keep the glove seated and improve seal with the coat sleeve

This wristlet style offers a tight interface with turnout gear while maintaining wrist mobility for tool handling, ladder work, and rescue operations.

Key Specs

• Model: Brenna Wristlet structural firefighting gloves
• Order number: 8082
• Back: Split cowhide leather, black
• Palm: Split cowhide leather, black
• Fourchettes: DuPont™ Nomex® fabric
• Thermo-protective layer: On back of hand and thumb
• Inner heat layer: Aramid non-woven fabric
• Moisture barrier: Porelle® P540 polyurethane FR membrane
• Lining: Increased-thickness aramid lining, brushed on reverse, stitched into fingertips
• Fit pattern: Anatomical 3D cut for grip, dexterity, and flexibility
• Wrist: Para-aramid knitted wristlet with elastic
• Certification: Certified by SEI to NFPA 1971, 2018 Edition
• Treatment: Materials used without intentional PFAS treatment
• Manufacturing: Produced in Holik facilities in Europe

The post Brenna Wristlet appeared first on Hunter Apparatus.

The Tarren Gauntlet by Holík America is built for structural firefighters who need maximum heat protection, reliable grip, and all-day comfort on the fireground. With a rugged leather shell, advanced thermal layers, and a Porelle® FR moisture barrier, these gloves are engineered to perform under intense heat, water, chemicals, and bloodborne pathogen exposure-without sacrificing dexterity.

Built for Structural Fireground Operations

The Tarren Gauntlet is designed for interior attack, overhaul, and extended operations where heat, steam, and mechanical hazards are nonstop. The anatomical 3D cut follows the natural shape of the hand for better control of tools, hose lines, and equipment, while the gauntlet cuff provides extended protection over the wrist and lower forearm.

Special stitching techniques keep the lining locked in at the fingertips, so it won’t twist or pull out when donning and doffing-even when the gloves are wet.

Outer Shell – Durable, Heat-Resistant Leather

The Tarren Gauntlet uses specially treated split cowhide leather on both the back and the palm to balance toughness and flexibility:

• Back: Split cowhide leather, treated for heat, water, and abrasion resistance
• Palm: Split cowhide leather for a confident, secure grip under tough conditions
• Fourchettes (between fingers): DuPont™ Nomex® fabric for improved dexterity and heat resistance

This construction gives firefighters a glove that holds up to repeated use in harsh environments while remaining supple enough for fine tasks.

Inner Layers – Thermal and Mechanical Protection

Under the leather shell, the Tarren Gauntlet integrates layered protection where it matters most:

• Thermo-protective layer on the back of the hand and thumb to block radiant and convective heat
• Aramid non-woven fabric provides increased heat, abrasion, and cut resistance, reinforcing the glove against mechanical hazards

These inner layers help maintain hand safety during flashover-level heat exposure and physically demanding tasks.

Moisture Barrier – Porelle® P540 FR Membrane

At the core of the glove’s protection is the Porelle® P540 polyurethane FR membrane, which:

• Creates a barrier against water, chemicals, bloodborne pathogens, and bacteria
• Remains highly breathable, flexible, and sensitive, supporting prolonged wear without excessive heat buildup
• Maintains firmness and structure to keep the glove feeling stable and secure on the hand

This barrier ensures that moisture and contaminants stay out while perspiration can escape.

Lining – Stable, High-Density Aramid

Inside, the Tarren Gauntlet features an aramid lining with increased thickness designed for both protection and usability:

• Increases heat protection by trapping more insulated air around the hand
• Will not stretch or pull out, maintaining shape over time and through repeated washes
• Brushed on the reverse to allow more air inside the glove and further enhance thermal insulation
• Enables easy donning and doffing even when wet, reducing downtime between assignments

Comfort, Dexterity & Grip

Holík’s anatomical 3D cut gives the Tarren Gauntlet a contoured, pre-curved shape that:

• Improves grip on tools and nozzles
• Enhances fine motor control for gear adjustments and equipment handling
• Reduces hand fatigue during long shifts

The glove’s design focuses on breathability, sensitivity, and flexibility, so firefighters retain critical feel and control even with multiple layers of protection.

Secure Wrist & Gauntlet Protection

The elastic-tightened wrist helps keep the glove seated correctly on the hand, reducing the risk of debris or embers entering the glove. The gauntlet cuff is designed to interface with turnout sleeves for continuous coverage and enhanced protection around the wrist and lower forearm.

NFPA 1971, 2018 Edition Certified

The Tarren Gauntlet is certified by SEI to comply with NFPA 1971, 2018 Edition for structural firefighting. It is manufactured in Holík’s European facilities under ISO 9001:2015-compliant quality systems to ensure consistent performance and reliability.

Sizing & Fit Options

The Tarren Gauntlet is available in an extensive NFPA-compliant size range to fit your crew properly:

• NFPA Sizing: 64N, 64W, 64XW, 70N, 70W, 70XW, 76N, 76W, 76XW, 82N, 82W, 82XW, 82XXW
• Spec Sizing Equivalent:
  • 64N – XS
  • 64W – S / short fingers
  • 64XW – M / short fingers*
  • 70N – S
  • 70W – M
  • 70XW – L / short fingers*
  • 76N – M / long fingers
  • 76W – L
  • 76XW – XL / short fingers*
  • 82N – L / long fingers
  • 82W – XL
  • 82XW – 2XL
  • 82XXW – 3XL*

*Some short/extra-wide variants available on special order.

Care & Maintenance

To maintain performance and hygiene:

• Machine wash up to 104°F (40°C) using mild detergent
• Do not use bleach
• Do not tumble dry
• Hang dry to preserve the integrity of the leather and barrier

Key Specs

• Model: Tarren Gauntlet – Order No. 8078
• Use: Structural firefighting gloves
• Back: Split cowhide leather, heat/water/abrasion resistant
• Palm: Split cowhide leather
• Fourchettes: DuPont™ Nomex® fabric
• Inner Layers: Thermo-protective layer + aramid non-woven fabric
• Moisture Barrier: Porelle® P540 FR polyurethane membrane
• Lining: Thick aramid lining, brushed reverse, non-pullout
• Cut: Anatomical 3D cut with advanced stitching; lining attached at fingertips
• Cuff Style: Gauntlet (wrist tightened with elastic)
• TPP: Exceeds 60
• Certification: NFPA 1971, 2018 Edition (SEI certified)
• Manufacturing: Holík facilities in Europe

The post Tarren Gauntlet appeared first on Hunter Apparatus.

The Holik Tarren Wristlet structural firefighting gloves are built for firefighters who need high heat protection, dependable grip, and consistent comfort on every call. With durable split cowhide leather, advanced aramid layers, and a Porelle® moisture barrier, these NFPA 1971 (2018) certified gloves are engineered for real fireground conditions.

Built for Structural Firefighting Environments

The Tarren Wristlet is designed to handle aggressive interior attack, overhaul, and ladder work where abrasion and impact are constant:

The back and palm are made from rugged split cowhide leather that resists wear from tools, debris, and harsh surfaces. This durable build gives firefighters a stable, confident grip on nozzles, hand tools, and ladders in both dry and wet environments.

Layered Heat and Cut Protection

Inside the glove, multiple technical layers work together to shield your hands from extreme conditions:

A thermo-protective layer on the back of the hand and thumb helps block high heat.
Aramid non-woven fabric adds extra resistance to heat, abrasion, and cuts in critical zones.
A thicker aramid lining further increases thermal protection and helps slow heat transfer to the skin.

These layers are designed to protect without turning the glove into a stiff, bulky shell, so firefighters can still move and work effectively.

Porelle® Moisture and Pathogen Barrier

The Tarren Wristlet uses a Porelle® P540 polyurethane FR membrane as a full moisture barrier that:

Creates a barrier against water, chemicals, bloodborne pathogens, and bacteria
Remains highly breathable to help manage sweat and internal moisture
Stays flexible and sensitive so dexterity and tool feel are maintained

This barrier gives firefighters added confidence when working in contaminated or fluid-heavy environments.

Secure, Stable Lining That Stays Put

Holik focuses on a lining system that doesn’t twist, pull, or come out:

Advanced stitching techniques attach the lining at the fingertips so it stays inside the glove.
The aramid lining is designed not to stretch or pull out while donning and doffing, even when wet.
The lining is brushed on the reverse to trap more air inside the glove and boost heat protection.

This design keeps the glove feeling consistent and predictable over its service life.

Dexterity, Grip, and Fit

The Tarren Wristlet is built to balance protection with control:

An anatomical 3D cut follows the natural shape of the hand for a better fit and stronger grip.
DuPont™ Nomex® fabric between the fingers (fourchettes) improves flexibility and heat resistance.
Breathable, flexible construction supports fine motor control for tool handling, radio operation, and equipment adjustments.
The elasticized wrist helps keep the glove in place and reduces debris entry.

Styles and Sizing Options

To match department preferences and turnout gear setups, the Tarren is available in:

Gauntlet cuff style for extended coverage
Para-aramid knitted wristlet style for a tighter seal at the wrist

A wide NFPA-based size assortment covers XS through 3XL with normal, wide, extra-wide, and special-order short/long finger options, helping departments properly fit more firefighters.

Certified Protection and European Manufacturing

The Tarren Wristlet is certified by SEI to comply with NFPA 1971, 2018 Edition. NFPA® is a registered mark of the National Fire Protection Association. Each pair is manufactured in Holik’s European facilities under strict quality standards.

If your department needs a structural firefighting glove that combines leather durability, layered thermal protection, and a modern moisture/pathogen barrier, the Holik Tarren Wristlet delivers reliable performance on the fireground.

Key Specs

Glove type: Structural firefighting gloves
Back: Split cowhide leather
Palm: Split cowhide leather
Fourchettes (between fingers): DuPont™ Nomex® fabric
Thermal layers: Thermo-protective layer on back of hand and thumb; aramid non-woven fabric
Moisture barrier: Porelle® P540 polyurethane FR membrane – water, chemical, and pathogen barrier; breathable and flexible
Lining: Thick aramid lining, brushed on reverse, non-stretch, stays in place
Fit features: Anatomical 3D cut; advanced stitching to anchor lining; elasticized wrist
Styles: Gauntlet cuff or para-aramid knitted wristlet
Sizing: XS–3XL with NFPA sizing options including narrow, wide, extra-wide, and special-order short/long fingers
Certification: SEI certified to NFPA 1971, 2018 Edition

The post Tarren Wristlet appeared first on Hunter Apparatus.

The Lesley Plus extrication gloves (Order No. 6510) are built for rescue professionals who need high visibility, serious cut protection, and excellent dexterity in harsh, debris-heavy environments. With a bright lime green back, Kevlar®-reinforced palm, debris-blocking cuff, and cut protection level 5 in the palm, these gloves deliver strong protection without sacrificing feel or control.

Designed for Demanding Extrication & Rescue

Lesley Plus gloves are engineered for operations around broken glass, sharp metal, and hot surfaces where grip, protection, and tactile feedback all matter. The 3D anatomical cut, fourchettes between the fingers, and advanced stitching techniques create a natural, close fit that supports:

• Confident tool handling and strong grip
• Excellent finger mobility and fine control
• Reduced hand fatigue during long incidents

The high-visibility lime green back and reflective elements help keep hand placement and signals visible in low light, night operations, and roadside scenes.

Outer Shell: Durable, Abrasion-Resistant Grip

Palm – Synthetic Leather
The palm is made from sensitive, strong, abrasion-resistant synthetic leather designed for tough extrication work.

Back – Elastic Textile (Lime Green)
The back of the glove uses a breathable, elastic textile that is permeable and comfortable while maintaining high visibility.

Reinforcements for Impact & Secure Control

Lesley Plus extrication gloves feature multiple reinforced zones to protect key impact and wear areas:

• Palm reinforced with DuPont® Kevlar® fiber/PA and foam padding
• Reflective reinforcement with foam fill to protect knuckles on the back of the hand
• PA/Kevlar® reinforcements with foam filling and synthetic leather on the back to protect knuckles, palm, and the area between thumb and index finger
• Anti-slip reinforcements on fingertips for excellent grip on tools, levers, and equipment

These reinforcements help extend glove life and maintain reliable performance in repeated heavy use.

Cut Protection & Heat Resistance

Inside the palm, a para-aramid/PES/fiberglass (Kevlar® with fiberglass) knitted lining delivers increased cut resistance while staying stitched at the fingertips to prevent pullouts.

Mechanical Risks – EN 388:2016+A1:2018 (Palm):

• Abrasion resistance: Level 4
• Cut resistance (coup test): Level 5
• Tear resistance: Level 4
• Puncture resistance: Level 4
• Cut resistance (TDM-100): Level D
• Impact protection: P (Pass) on the back of the hand

Contact Heat – EN 407:2020:

• Contact heat: Level 2 – withstanding contact temperatures of 250°C (482°F) for at least 15 seconds without significant heat transfer to the inside of the glove

Debris-Blocking Cuff & Wrist Protection

The cuff system is designed to keep debris out while maintaining comfort and mobility:

• Debris cuff lined with elastic to stop ingress of dirt, glass, and particles
• Elastic wristband and cuff structure help seal around the wrist while still allowing easy donning and removal

Dexterity, Fit & Comfort

Lesley Plus extrication gloves are built around an anatomical pattern that supports natural hand movement:

• 3D style glove with fourchettes between fingers for improved flexibility and dexterity
• Advanced stitching techniques keep the lining in place and prevent twisting or pullouts
• Lining stitched at fingertips so it stays permanently attached and does not pull out
• Breathable construction for better comfort, sensitivity, and flexibility

This combination makes the glove feel less bulky while still providing high-level protection in the palm and back of hand.

Care & Maintenance

To preserve protection performance and comfort:

• Machine wash up to 104°F (40°C)
• Use mild detergent only
• Do not use bleach
• Do not tumble dry
• Hang dry

Proper care helps maintain the integrity of the outer shell, reinforcements, and protective lining over time.

Key Specs

• Product: Lesley Plus Extrication Gloves
• Outer shell – Palm: Synthetic leather, abrasion-resistant with PA/Kevlar® foam reinforcements
• Outer shell – Back: Elastic lime green textile with PA/Kevlar® foam reinforcements
• Palm lining: Para-aramid/PES/fiberglass (Kevlar® with fiberglass), stitched at fingertips
• Cuff: Debris cuff lined with elastic to prevent dirt ingress
• Protection: EN 388:2016+A1:2018 (4 5 4 4 D P), EN 407:2020 (Contact heat Level 2)
• Cut protection: Level 5 (coup test) in palm
• Impact protection: Passed (P) on back of the hand
• Size assortment: XXS, XS, S, M, L, XL, 2XL, 3XL, 4XL

DuPont™ and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.

The post Lesley Plus appeared first on Hunter Apparatus.

The Holik Blaze extrication gloves are built for firefighters, rescue crews, and first responders who need serious impact and cut protection without sacrificing feel and control. With anatomical TPR protection on the back of the hand and a high cut-resistant palm, Blaze gloves let you work confidently around broken glass, sharp metal, and heavy debris while still operating tools with precision.

Built for Demanding Rescue Environments

These protective gloves are designed for real-world firefighting and rescue work where hands take constant abuse from impact and mechanical risks. The Blaze’s ergonomic TPR layout across the back of the hand and fingers disperses impact while preserving flexibility, dexterity, and comfort so you can stay focused on the job, not your gloves.

Durable Outer Shell with High-Grip Palm

The outer construction of the Blaze glove is tuned for durability and control:

Palm and fingers – Synthetic leather for strong grip and abrasion resistance
Back – Lime green elastic fabric for comfort, flexibility, and visibility
Fingertips – Anti-slip reinforcements for secure tool handling, even in wet or dirty conditions

This combination gives you a tough, long-lasting shell that still delivers excellent feel in the fingers.

Layered Reinforcements for Maximum Protection

Blaze extrication gloves use targeted reinforcements to protect the most exposed areas of the hand:

Thermoplastic rubber (TPR) – Back-of-hand and finger protection against impact
Kevlar®/PA elastic knit with FR coating and foam padding – Reinforces the highest-wear zones in the palm
Kevlar®/PA elastic knit with FR padding – Protects the palm and the area between the thumb and index finger
Anti-slip fingertip patches – Improve grip and control on tools and equipment

This layered design helps Blaze achieve top-tier performance against abrasion, cuts, tears, punctures, and impact while staying flexible enough for detailed work.

High Cut-Resistant Palm Lining

Inside the palm, Blaze gloves feature a technical knit lining engineered for high cut resistance and durability:

Para-aramid / Polyester / Fibreglass knit lining in the palm

This inner layer helps guard your hands from glass, jagged metal, and other sharp edges commonly encountered during extrication and rescue operations.

Two Cuff Options for Different Missions

The Blaze line offers two cuff configurations so you can choose the fit and protection that works best for your tasks:

Blaze Evo – 6511-02
Debris cuff with elastic textile that helps prevent dirt, glass, and debris from entering the glove.

Blaze Neo – 6511-07
Elastic neoprene wristband with Velcro fastening for a secure, adjustable fit that stays in place under load.

Both versions are easy to don and doff while keeping the glove seated properly during aggressive use.

Certified Mechanical Protection & Impact Performance

Blaze extrication gloves are certified to EN 388:2016+A1:2018 for protection from mechanical risks, with performance levels that rank at or near the maximum:

Abrasion resistance – Level 4
Tear resistance – Level 4
Puncture resistance – Level 4
Cut resistance (TDM-100 test) – Level F (maximum)
Impact protection – P (pass – protective TPR on the back of the hand)

This 4XF4P performance rating means Blaze gloves deliver maximum-rated abrasion, tear, puncture, and TDM cut resistance along with certified impact protection.

Key Specs

Product type: Protective extrication / rescue gloves for firefighters and first responders
Models: Blaze Evo 6511-02 (debris cuff), Blaze Neo 6511-07 (neoprene Velcro cuff)
Outer shell – Palm and fingers: Synthetic leather
Outer shell – Back: Lime green elastic fabric
Reinforcements: TPR on back and fingers; Kevlar®/PA elastic knit with FR coating and foam padding in high-wear palm zones; Kevlar®/PA elastic knit with FR padding in palm and thumb/index area; anti-slip reinforcements on fingertips
Lining (palm): Para-aramid / Polyester / Fibreglass knit
Cuff options: Debris cuff (Evo) or neoprene Velcro wrist (Neo)
Protection standard: EN 388:2016+A1:2018 – 4 X 4 4 F P
Core benefits: Highest protection levels to mechanical risks, excellent impact protection, high sensitivity and dexterity, cuff designs that help prevent ingress of dirt and debris
Size range: XXS, XS, S, M, L, XL, 2XL, 3XL, 4XL

The post Blaze appeared first on Hunter Apparatus.

The Penelope Plus Green extrication gloves are built for firefighters and rescue professionals who need serious impact and cut protection without giving up feel and control. With goatskin leather in the palm, TPR impact protection on the back of the hand, and a highly cut-resistant Kevlar® lining, these rescue gloves deliver the safety, comfort, and durability you need on every call.

Built for Demanding Extrication and Rescue Work

These gloves are designed for high-risk environments where sharp metal, glass, and crushing hazards are part of the job. The close-fitting pattern, flexible back, and reinforced palm area give you confident grip and tool control during vehicle extrication, technical rescue, and other intense operations.

• Excellent dexterity and flexibility for fine motor tasks
• Impact protection on knuckles and back of the hand
• Hi-vis green design for better visibility on scene

Durable Outer Shell with Smart Reinforcement

The Penelope Plus Green glove combines rugged materials with targeted reinforcements in high-wear areas to extend glove life and maintain performance.

Outer Shell
Palm and fingers – Goatskin leather with hydrophobic treatment for strong grip, tactility, and added water resistance
Back – Breathable elastic textile that flexes with hand movement

Reinforcements
Leather reinforcement – Protects the back of the hand and fingers from abrasion and impact
TPR reinforcements – Guard the knuckles and back of the hand from knocks and blows
Digital leather reinforcement in the fingertips – Boosts durability and control where you need it most
Elastic Kevlar® knitting with FR coating – Reinforcement between the thumb and index finger overlapping the side seams for high cut and abrasion resistance and longer glove life

High Cut Protection and Heat Performance

Inside the palm, a technical knitted lining offers serious cut performance without killing your feel.

Lining in Palm
Knitted lining made of Kevlar® fiber / PES / fiberglass for high cut resistance in critical contact areas

Certified Protection
Protection from mechanical risks – EN 388:2016+A1:2018
Protection from contact heat – EN 407:2020

EN 388:2016+A1:2018 Ratings (Palm)
Abrasion resistance: 3
Cut resistance (coup test): 4
Tear resistance: 4
Puncture resistance: 3
Cut resistance (TDM-100 test): C
Impact protection on the back: P (Pass)

Comfort Features for All-Day Wear

Penelope Plus Green extrication gloves are designed to be comfortable enough to wear through long shifts and complex incidents.

• Close-fitting “comfort fit” pattern for secure control without bulk
• Breathable construction to help reduce sweat buildup
• Terry fabric on the outside of the thumb for wiping sweat
• Elastic neoprene wristband with Velcro® fastening for a snug, adjustable seal
• Plastic ring for hanging the gloves on a carabiner when not in use

Care and Maintenance

Proper care helps maintain performance and extend the life of the gloves.

• Machine wash up to 104 °F (40 °C)
• Use mild detergent only
• Do not use bleach
• Do not tumble dry – hang dry only

Key Specs

Glove type: High-protection extrication and rescue gloves
Model name: Penelope Plus Green
Order / Catalog number: 6517
Palm material: Goatskin leather with hydrophobic treatment
Back material: Breathable elastic textile
Palm lining: Knitted Kevlar® / PES / fiberglass (high cut resistance)
Reinforcements: Leather on back of hand and fingers, digital leather fingertips, Kevlar® elastic panel between thumb and index with FR coating
Impact protection: TPR on knuckles and back of hand, impact protection on back rated “P”
Mechanical protection: EN 388:2016+A1:2018 (3X43C, with impact)
Heat protection: EN 407:2020 (contact heat protection in the palm)
Fit: Close-fitting ergonomic “comfort fit” design
Cuff: Elastic neoprene wristband with Velcro® closure
Additional features: Terry thumb panel for sweat, plastic ring for carabiner hanging, hi-vis green design
Size range: XS – S – M – L – XL – 2XL – 3XL

The post Penelope Plus appeared first on Hunter Apparatus.

The Vespid Extrication Gloves EVO and NEO are made for firefighters and rescue crews who need strong protection without losing movement. These gloves are lightweight but tough. They protect the palm from mechanical risks and contact heat while the back of the hand gets extra impact protection. You can work with confidence in demanding, high-risk conditions.

Built for Flexibility and Control

Vespid extrication gloves are designed for easy movement.
They bend with your hand, not against it.

The ergonomic shape:

• Reduces restriction
• Increases comfort
• Helps you keep a strong grip on tools and equipment

They are ideal for firefighting, vehicle extrication, and technical rescue work where hand dexterity is critical.

Durable Pigskin Palm & Reinforced Back

The outer shell is built to handle heavy use in tough environments:

• Palm and fingers: Highly durable pigskin for strong grip and abrasion resistance
• Back: Polyester with durable decorative silicon printing
• High-wear zones: Reinforced with robust silicon printing for longer life
• Between index finger and thumb: Natural leather reinforcement for extra strength

This design helps the gloves last longer while staying reliable on every call.

Impact and Heat Protection

Vespid EVO and NEO gloves provide layered protection where it matters most:

• Back-of-hand impact protection:
  • EVA foam anti-impact padding over the knuckles helps absorb shocks and bumps
• Palm lining:
  • Para-aramid / polyester / fiberglass blend adds cut and heat resistance
• Contact heat protection:
  • Certified to EN 407:2020, Level 1

They can withstand contact temperatures of 100°C (212°F) for at least 15 seconds without a dangerous temperature rise inside the glove.
This makes them suitable for work around sharp edges, rough surfaces, and hot materials.

Comfortable, Functional Cuff Options

You can choose between two cuff styles based on your job and preference:

• Vespid EVO:
  • Elastic cuff with an inner wristband to help keep out dirt and debris
• Vespid NEO:
  • Elastic cuff made of laminated neoprene with a Velcro closure for an adjustable, secure fit

Both cuff designs help keep the gloves in place and improve comfort during long shifts.

Tested and Certified Performance

Vespid extrication gloves meet important European safety standards:

• EN ISO 21420:2020 – General glove requirements
• EN 388:2016+A1:2018 – Protection from mechanical risks
• EN 407:2020 – Protection from thermal risks (contact heat)

Mechanical protection ratings (palm, EN 388:2016+A1:2018):

• Abrasion resistance: Level 4
• Cut resistance (coup test): X
• Tear resistance: Level 3
• Puncture resistance: Level 3
• Cut resistance (TDM-100 test): Level C

Contact heat rating (EN 407:2020):

• Level 1 – Can withstand contact at 100°C (212°F) for at least 15 seconds

Wide Size Range for Every Team Member

Vespid firefighting and extrication gloves come in a wide size run to support a better fit and better control:

XXS – XS – S – M – L – XL – 2XL – 3XL – 4XL

A proper fit helps improve grip, comfort, and safety.

Models & Catalog Numbers

• Vespid EVO – Catalog number: VESPID EVO 6512-02
• Vespid NEO – Catalog number: VESPID NEO 6512-07

Key Specs

• Type: Vespid Extrication Gloves EVO & NEO – firefighting and rescue gloves
• Palm and fingers: Highly durable pigskin
• Back: Polyester with durable silicon printing
• Reinforcements:
  • EVA foam anti-impact padding over knuckles
  • Natural leather between index finger and thumb
  • Silicon-printed reinforcement in high-wear areas
• Palm lining: Para-aramid / polyester / fiberglass
• Cuff:
  • Vespid EVO – Elastic cuff with inner wristband
  • Vespid NEO – Laminated neoprene cuff with Velcro fastening
• Certifications: EN ISO 21420:2020, EN 388:2016+A1:2018, EN 407:2020
• Mechanical protection (palm, EN 388): Abrasion 4 | Tear 3 | Puncture 3 | TDM-100 cut Level C
• Contact heat (EN 407): Level 1 – 100°C (212°F) for at least 15 seconds
• Size range: XXS-4XL

The post Vespid appeared first on Hunter Apparatus.