The X2 Leather Fire Boot from Black Diamond is built for firefighters who want real leather, serious protection, and all-day comfort. With a 14-inch height, heavyweight firefighter leather, Armor AP™ upper, and CROSSTECH® waterproof membrane, this structural leather fire boot keeps you protected, supported, and ready from the first alarm to the last.

Built for Structural Firefighting

The X2 Leather Fire Boot is engineered for demanding structural, EMS, and liquid-splash environments where ordinary boots fall short. Its construction includes:

• Heavyweight firefighter leather upper with Armor AP™ for durability and heat resistance
• Fusion upper using Filament Twill Technology™ with DuPont™ Kevlar®
• CROSSTECH® waterproof, breathable membrane with Omaha lining to block water and contaminants
• Kevlar® lining for added cut and thermal protection
• Extended, form-fitting shin guard for tibia protection on ladders, stairs, and debris

This leather firefighter boot is designed to stand up to the heat, impact, and abrasion of real-world fireground conditions.

Athletic Comfort with Comfort Fit Plus

Instead of feeling like stiff bunker gear, the X2 is built to move more like an athletic work boot while still meeting NFPA standards. Comfort features include:

• Comfort Fit Plus design for a more natural, secure fit
• ORTHOLITE® 3-density, multi-fit, removable footbed with TPU heel cradle
• Shock-absorbing underfoot structure for long hours on concrete, apparatus floors, and pavement
• Anti-odor, anti-fungal, and breathable properties to help manage sweat and odor
• Proprietary Rubber Comfort Cup sole with Comfort Flex for easier walking, climbing, and kneeling

You get structural protection with comfort that feels broken-in much faster than typical leather fire boots.

Custom Multi-Fit Sizing System

Every pair of X2 Leather Fire Boots is built with a multi-fit system that lets you tune the width without changing sizes:

• Medium width: Boot comes standard in medium width with main ORTHOLITE® footbed and two filler layers
• Wide width: Remove one filler layer and reinsert the footbed
• Extra-wide width: Remove both filler layers and reinsert the footbed

This three-widths-in-one design provides better fit across the crew, reducing special orders and improving comfort and stability for each firefighter.

3-Point Heel Locking System

Heel slippage wastes energy and can slow you down. The X2’s exclusive 3-Point Heel Lock system:

• Reduces heel lift and friction
• Helps keep your foot locked in during climbing, crawling, and running
• Improves stability under load and during rapid movement

The result is a secure, confidence-inspiring fit when it matters most.

Layered Protection & Safety

To match its comfort and fit, the X2 Leather Fire Boot is loaded with safety components, including:

• Oblique, comfort-wide steel toe for more room and less pinch
• Stainless steel puncture-resistant plate for underfoot protection
• Double-ridged steel shank for arch support on ladders and uneven ground
• Molded rubber toe cap and heel guard for high abrasion resistance and ankle support
• Flame-resistant and reflective 3M Scotchlite® accents for better visibility
• Integrated and reinforced pull-on system for quick, reliable donning

This structural leather boot is built to help protect you from the ground up on every call.

Key Specs

• Boot height: 14 inches
• Upper: Heavyweight firefighter leather with Armor AP™
• Fusion upper: Filament Twill Technology™ with DuPont™ Kevlar®
• Lining: CROSSTECH® waterproof, breathable membrane with Omaha lining
• Additional lining: Kevlar® for cut and heat protection
• Footbed: ORTHOLITE® 3-density, multi-fit, removable comfort footbed with TPU heel cradle
• Outsole: Proprietary Rubber Comfort Cup sole; high heat, high-traction, abrasion-resistant rubber
• Toe cap: Oblique comfort-wide steel toe
• Protective plate: Stainless steel puncture-resistant plate
• Shank: Double-ridged steel
• Fit system: Medium, wide, and extra-wide in each pair via removable filler layers
• Heel system: Exclusive 3-Point Heel Lock system
• Reflectivity: Flame-resistant and reflective 3M Scotchlite® trim
• Certification: NFPA 1971, NFPA 1990 (1992), NFPA 1999, CSA Z195

The post X2 Leather Fire Boot appeared first on Hunter Apparatus.

The Black Diamond Rubber Firefighter Boot is built for firefighters who demand serious protection and real all-day comfort on every call. With a precise Comfort Fit last, roomy steel toe, and removable OrthoLite® footbed, this rubber fire boot is designed to perform under heat, pressure, and long shifts without wrecking your feet.

Built for Structural Firefighting and Harsh Environments

This rubber firefighter boot is engineered for structural fire operations, liquid splash exposure, and demanding work conditions. The 16-inch rubber upper helps shield your lower leg from heat, debris, and hazardous fluids while maintaining durability and flexibility on the fireground.

The heavy, one-piece molded K-Lug outsole with 3.5 mm heavy corrugation delivers dependable traction on wet, slick, and uneven surfaces commonly found around apparatus bays, fire scenes, and industrial sites.

Comfort Fit Design with OrthoLite®

The Rubber Firefighter Boot uses Black Diamond’s Comfort Fit last to give your foot more natural room inside the boot instead of squeezing your toes and crushing your heel.

Key comfort features include:

• Larger, naturally shaped steel toe cap for full toe movement
• Anatomically tapered heel that locks your heel in place and reduces heel slip
• Removable OrthoLite® breathable polyurethane sock liner for:
  • Extra cushioning during long incidents
  • Better moisture management for a drier feel
  • A healthier environment under the foot

Under the footbed, a high-density polyurethane midsole absorbs impact and adds another layer of support, so the boot stays comfortable from the first call to the last.

Advanced Lining, Insulation and Construction

Inside, the Black Diamond Rubber Firefighter Boot is layered for warmth, comfort, and long-term durability:

• 9.5 mm coated felt insulation for thermal protection
• 4.8 mm open-cell foam for cushioning and breathability
• Kevlar/Nomex leg lining with 1.2 mm coating for heat and flame resistance
• .76 mm net lining, calendar coated for added durability

Stitched-down linings are designed to prevent liner pull-out, even with repeated donning and doffing. A high-abrasion, non-slip nylon heel lining provides maximum wear resistance and keeps the boot fitting secure over time.

Safety, Stability and Certified Protection

This rubber firefighter boot is built with multiple steel safety components to protect against impact, penetration, and instability under tough conditions:

• Stainless steel safety toe meeting or exceeding CSA 93 ft./lb. drop test
• Steel puncture-resistant plate passing the 300 lb. penetration test
• Double-ridged steel shank for arch support and ladder stability
• Heavy tibia protector for added front-of-leg impact protection

For electrical and workplace safety, this boot meets or exceeds:

• NFPA 1971 – 2018: Standard for structural firefighting
• NFPA 1992 – 2018: Liquid splash protection
• CSA Z195-92: Protective footwear (toe, plate, E.S.R.)
• Federal OSHA 29 CFR 1910.156(e)(2)
• Cal OSHA Title 8 G150 Section 3408
• E.S.R. (EH) 18 kV test

Durable rubber-coated pull-on loops make it easier to get the boots on quickly, even with gloves, so you’re not wasting time in the bay.

Key Specs

• Product: Black Diamond Rubber Firefighter Boot
• SKU / Stock No.: 6999451 / 699-9451
• Boot height: 16 inches
• Insulation: 9.5 mm coated felt, 4.8 mm open-cell foam
• Leg lining: Kevlar/Nomex with 1.2 mm coating, .76 mm calendar-coated net lining
• Lining construction: Stitched down to prevent liner pull-out; high-abrasion nylon heel for secure fit
• Footbed: Removable OrthoLite® breathable polyurethane sock liner
• Midsole: High-density polyurethane cushioning
• Tibia protection: Integrated tibia protector
• Toe cap: Stainless steel safety toe
• Midsole protection: Steel puncture-resistant plate
• Shank: Double-ridged steel shank
• Outsole: One-piece molded K-Lug rubber outsole, 3.5 mm heavy corrugation
• Electrical protection: E.S.R. (EH) tested to 18 kV
• Certifications: NFPA 1971 (2018), NFPA 1992 (2018), CSA Z195-92, Federal OSHA 29 CFR 1910.156(e)(2), Cal OSHA Title 8 G150 Section 3408

The post Rubber Firefighter Boot appeared first on Hunter Apparatus.

The Black Diamond Rubber Hip Boot is built for tough, wet, and dirty jobs where ordinary work boots aren’t enough. With a full 31-inch height, waterproof rubber construction, and steel safety components, this boot keeps you dry, protected, and comfortable from foot to hip all shift long.

Built for Wet, Heavy-Duty Environments

This rubber hip boot is designed for professionals who stand in water, mud, and harsh conditions for hours at a time. The rugged rubber upper and hip-height coverage help keep legs dry and shielded, while the abrasion-resistant, anti-slip outsole keeps your footing secure on slick, uneven surfaces.

Comfort Fit Design with OrthoLite®

The Rubber Hip Boot features Black Diamond’s Comfort Fit last, giving your foot more natural room inside the boot instead of squeezing your toes. A larger, naturally shaped steel toe cap allows full toe movement without pressure points.

Underfoot, the removable OrthoLite® breathable polyurethane sock liner delivers:

• Extra cushioning for long shifts
• Better moisture management for a drier feel
• A healthier environment under the foot

Beneath the footbed, a high-density polyurethane midsole absorbs impact and adds another layer of comfort and support.

Layered Protection & Insulation

Upper and leg construction includes:

• Durable rubber outer layers
• Foam insulation and filler layers for warmth and comfort
• Canvas and felt inner linings in the leg for added insulation

This multi-layer build helps keep legs warmer and more comfortable in cold, wet conditions without sacrificing durability.

Safety & Stability

For protection and support in demanding worksites, the Black Diamond Rubber Hip Boot includes:

• Steel protective toe cap
• Steel midsole for underfoot puncture resistance
• Steel shank for arch support and stability on ladders and uneven ground
• Rugged rubber, anti-slip, abrasion-resistant outsole

Internal mid-way pull-on loops make it easier to get the boots on and adjusted.

Key Specs

• Boot height: 31 inches (hip boot)
• Upper: Rubber with multiple protective and insulating layers
• Leg lining: Canvas and felt
• Footbed: Removable OrthoLite® breathable polyurethane sock liner
• Midsole: High-density polyurethane cushioning
• Toe cap: Steel
• Midsole protection: Steel
• Shank: Steel
• Outsole: Rugged rubber, anti-slip, abrasion resistant
• Certification: Non-NFPA certified boot

The post Rubber Hip Boot appeared first on Hunter Apparatus.